Teledyne LeCroy Summit T24 PCIe Multi-lane Protocol Analyzer User Manual - Manual (Page 126)

Teledyne LeCroy Decoding Traffic
114 Summit T24 PCI Express Multi‐Lane Protocol Analyzer User Manual
6.13.6 AHCI
AHCI level decode displays AHCI transactions. PETracer decodes the storage
commands starting from lower Transaction Layer decodes. In the case of AHCI, it will
decode first the Packet Level, then the Link Transaction level, then the Split Transaction
Level and finally the AHCI decode level.
Note: The trace must contain the device enumeration sequence so the decoding picks up the
associated base addresses and AHCI transactions can be properly decoded. If the enumeration
sequence is not available the base addresses must be manually entered in the PCIe SSD
Configuration dialog from the Tools menu.
6.13.7 ATA
ATA level decode displays SATA transactions. PETracer decodes the storage
commands starting from lower Transaction Layer decodes. In the case of ATA, it will
decode first the Packet Level, then the Link Transaction level, then the Split Transaction
Level, then AHCI level and finally the ATA decode level.
Note: The trace must contain the device enumeration sequence so the decoding picks up the
associated base addresses and ATA transactions can be properly decoded. If the enumeration
sequence is not available the base addresses must be manually entered in the PCIe SSD
Configuration dialog from the Tools menu.