Teledyne LeCroy Summit T24 PCIe Multi-lane Protocol Analyzer User Manual - Manual (Page 152)

Teledyne LeCroy Specifying General Display Options
140 Summit T24 PCI Express Multi‐Lane Protocol Analyzer User Manual
8.2 Specifying General Display Options
The Display Options General tab allows you to specify:
Zoom Level: Defines the size of packet fields in the packet view. Zoom level is adjustable
as 10, 20, 40, 60, 80, 100, 120, 140, 160, 180 and 200 percent.
Enable Tool tips: Allows information to be displayed on a packet by resting your mouse
pointer over it.
Wrap: Allows packets, Link Transactions, and Split Transactions to wrap within the
display.
Hierarchy Lines: Adds lines to the trace view indicating relations between packets,
Link Transactions, and Split Transactions.
Timestamp position: Moves timestamp location from end of packet to beginning of
packet, or merges it with the packet number.
Protocol Level to View: Allows the CATC Trace to be displayed in different hierarchical
levels: Packets, Link Transactions, Split Transactions, NVM Transactions, PQI, AHCI and
ATA command transactions.
Time Stamp: Gives you options for setting the timestamp to zero for either the first
CATC Trace packet or the trigger packet or for leaving the stamp unchanged as it was
originally recorded.
8.2.1 Fonts
Fonts: Allows the appearance of field text and/or data text to be defined.
8.2.2 Configuration Name
Display Configuration Name: This field is used to enter a text string to be associated with
the current set of Display Options. This name is saved with the Display Options file, and
appears as part of the title of the packet view window that uses this set of Display
Options.
8.2.3 Color, Format, and Hiding Options
The Color/Format/Hiding tab allows you to customize the colors and formats associated
with each field in the CATC Trace and to selectively hide fields or packets. You access
these display options by selecting Setup > Display Options > Color/Format/Hiding tab.
The Color/Format/Hiding property page lets you set how fields display in a CATC Trace.
This property page lets you set field color and data format (binary, hex, decimal, ASCII),
and lets you hide selected fields from the display (see
Figure 8.2 on page 141 ).