Teledyne LeCroy Summit T24 PCIe Multi-lane Protocol Analyzer User Manual - Manual (Page 102)

Teledyne LeCroy Filter Out
90 Summit T24 PCI Express Multi‐Lane Protocol Analyzer User Manual
Figure 5.47: Events with Channels
5.25 Filter Out
A filter causes the Analyzer to filter out specified events from the recording. If events are
filtered out of the recording, they are excluded from the Analyzer's buffer and not simply
hidden from the CATC Trace. The purpose of filtering is to preserve recording memory so
you conduct longer recording sessions and exclude events that do not interest you.
To enable or disable filtering, place an event button into either the Global State cell or
the Sequence cell, then right‐click the button and choose an Action (see previous topic).
From the sub‐menu, select Filter Out (see Figure 5.48 on page 90 ).
Figure 5.48: Filter Out Option
Note:
The Filter Out option is only available in the DLLP, TLP, and Ordered Sets TS1 and TS2.