IAI America E-Con - Manual (Page 52)

4. XSEL-R/S/RX/SX/RXD/SXD
44
4.4 Setting example
(1) Example for when using only PROFIBUS
It is how to establish the setting when using PROFIBUS to 16 points of each input and output from the top of the
standard I/O ports, and no other I/O port (for I/O board, etc.) is to be used.
Standard Input Port No.0 to 15
Standard Output Port No.300 to 315
(PROFIBUS board) Not Applicable (I/O board)
xI/O Parameters
No. Parameter name
Default
(Reference)
Input Range Unit Remarks
1 I/O Port Allocation Type 1 0 to 1 0
0:Fixed Allocation
1:Automatic Allocation
xReference 1 Priority of I/O Port Assignment when
automatically assigned
Port Number
(No.0 to 299/No.300 to 599)
1) Network I/F Module 1
2) I/O slot 1 (I/O1) Mounting board
3) I/O slot 2 (I/O2) Mounting board
* I/O slot 1 (I/O1) Assigned for the
continuously mounted range from
mounting board
xReference 2 Priority of extension I/O ports at
automatic assignment
Port Number
(No.1000 to 3999/No.4000 to 6999)
1) Network I/F Module 2
2) Expansion I/O unit
3) IA Net
2
Standard I/O Fix-Allocated
Input Port Start No.
0 -1 to 599 -1
0+ (Multiples of 8)
[Ineffective when -1 is selected]
3
Standard I/O Fix-Allocated
Output Port Start No.
300 -1 to 599 -1
300+ (Multiples of 8)
[Ineffective when -1 is selected]