IAI America E-Con - Manual (Page 12)

4
No.
Operation
Description
Description
5 Teaching Ɣ When the work is carried out with 2 or more persons, make it clear who is
to be the leader and who to be the follower(s) and communicate well with
each other to ensure the safety of the workers.
Ɣ Perform the teaching operation from outside the safety protection fence, if
possible. In the case that the operation is to be performed unavoidably
inside the safety protection fence,
SUHSDUHWKH³6WLSXODWLRQVIRUWKH
2SHUDWLRQ´DQGPDNHVXUHWKDW all the workers acknowledge and
understand them well.
Ɣ When the operation is to be performed inside the safety protection fence,
the worker should have an emergency stop switch at hand with him so that
the unit can be stopped any time in an emergency.
Ɣ When the operation is to be performed inside the safety protection fence,
in addition to the workers, arrange a watchman so that the machine can be
stopped any time in an emergency. Also, keep watch on the operation so
that any third person can not operate the switches carelessly.
Ɣ 3ODFHDVLJQ³8QGHU2SHUDWLRQ´DWWKHSRVLWLRQHDV\WRVHH
Ɣ When releasing the brake on a vertically oriented actuator, exercise
precaution not to pinch your hand or damage the work parts with the
actuator dropped by gravity.
6DIHW\SURWHFWLRQ)HQFH,QWKHFDVH that there is no safety protection
fence, the movable range should be indicated.
6 Trial
Operation
Ɣ When the work is carried out with 2 or more persons, make it clear who is
to be the leader and who to be the follower(s) and communicate well with
each other to ensure the safety of the workers.
Ɣ After the teaching or programming operation, perform the check operation
one step by one step and then shift to the automatic operation.
Ɣ When the check operation is to be performed inside the safety protection
fence, perform the check operation using the previously specified work
procedure like the teaching operation.
Ɣ Make sure to perform the programmed operation check at the safety
VSHHG)DLOXUHWRGRVRPD\UHVXOWLQDQDFFLGHQWGXHWRXQH[SHFWHG
motion caused by a program error, etc.
Ɣ Do not touch the terminal block or any of the various setting switches in
WKHSRZHU21PRGH)DLOXUHWRGRVRPD\UHVXOWLQDQHOHFWULFVKRFNRU
malfunction.
7 Automatic
Operation
Ɣ Before the automatic operation is started up, make sure that there is
nobody inside the safety protection fence.
Ɣ Before the automatic operation is started up, make sure that all the related
peripheral machines are ready for the automatic operation and there is no
error indication.
Ɣ Make sure to perform the startup operation for the automatic operation, out
of the safety protection fence.
Ɣ In the case that there is any abnormal heating, smoke, offensive smell, or
DEQRUPDOQRLVHLQWKHSURGXFWLPPHGLDWHO\VWRSWKHPDFKLQHDQGWXUQ2))
WKHSRZHUVZLWFK)DLOXUHWRGRVRPD\UHVXOWLQDILUHRUGDPDJHWRWKH
product.
Ɣ When a power failure occurs, turn O))WKHSRZHUVZLWFK)DLOXUHWRGRVR
may cause an injury or damage to the product, due to a sudden motion of
the product in the recovery operation from the power failure.