IAI America ACON-SE - Manual (Page 69)

59
4. Description of Operating Functions
Operational Description
[1] If operation becomes ready after the power is turned on, the operation ready (SV) and position complete
3(1'VLJQDOVEHFRPH³´$IWHUFRQILUPLQJWKDW3(1'LV³´VSHFLI\SRVLWLRQDQGVHWWKHSRVLWLRQLQJVWDUW
VLJQDO&675WR
To specify a position, specify the position number as six bits from PC1 to PC32 or directly specify the
QXPHULFYDOXHLQUHJLVWHU3&0'
o Concurrently with the start of home return operDWLRQ3(1'ZLOOEHFRPH³´DQG029(ZLOOEHFRPH³´
>@ $IWHUFRQILUPLQJWKDW029(KDVEHFRPH³´VHW&675WR³´
o Immediately after the completion of home return operation (HEND will become ³´SRVLWLRQLQJRSHUDWLRQ
WRSRVLWLRQZLOOVWDUW
[3] When the set positioning band corresponding to the command value of position 1 is reached, PEND will
EHFRPH³´029(ZLOOEHFRPH³´DQGWKHFRPSOHWHGSRVLWLRQQXPEHUZLOOEHRXWSXWDVVL[ELWVIURP30
WR30LQUHJLVWHU3266
>@ 7KHQVSHFLI\SRVLWLRQDQGVHW&675WR³´LQWKHVDPHZD\VDV>@3RVLWLRQLQJRSHUDWLRQWRSRVLWLRQZLOO
VWDUW
>@ 3RVLWLRQLQJWRSRVLWLRQZLOOEHFRPSOHWHGLQWKHVDPHZD\DV>@
Caution: When the start signal turns ON, the position complete output will turn OFF and the
PRYLQJRXWSXWZLOOWXUQ21
The start signal must be turned OFF with the confirmation that the moving output has
turned ON (the position complete output has turned OFF) while the start signal remains
21
If the start input remains ON as shown below, the position complete output will not turn
21HYHQLIWKHDFWXDWRUPRYHPHQWKDVEHHQFRPSOHWHG
Movement completed
Start
Position complete
Moving
$FWXDWRU
1 msec or less