Teledyne 9110TH - Nitrogen Oxides Analyzer - Manual (Page 65)

Getting Started Model 9110TH NOx Analyzer
Teledyne Analytical Instruments 45
STEP 2 - Dilution Ratio:
If the dilution ratio option is enabled on your 9110TH/M and your application involves
diluting the sample gas before it enters the analyzer, set the dilution ratio as follows:
SETUP X.X PRIMARY SETUP MENU
CFG DAS RNGE PASS CLK MORE EXIT
SETUP X.X RANGE CONTROL MENU
UNIT DIL EXIT
SETUP X.X DIL FACTOR:1.0 Gain
0 0 0 0 .0 ENTR EXIT
SAMPLE A1:NXCNC1=100PPM NOX=XXX.X
< TST TST > CAL SETUP
Toggle these
buttons to select the
dilution ratio factor
EXIT ignores the new
setting and returns to the
previous display.
ENTR accepts the new
setting and returns to the
previous display..