CognitiveTPG DLXi User Manual
Page 82
S T A N D A R D P R I N T E R C O M M A N D S
Function
Enables automatic label indexing. When printing is
finished the printer feeds the label stock until the
next label's first dot row is positioned under the
printhead burn line (based on the position of the
label's indexing cue; i.e., the black bar or gap
location). This is the default operating mode. Label
indexing remains on unless disabled with a
command.
IMPORTANT!
Do not use this command when using continuous-form
media. Continuous-form media has no indexing cues
and will feed continuously if automatic label indexing is
enabled.
Explicit Form
INDEX
Implicit Form
I
Parameters None
NOTE: Because INDEX positions the first dot row of the
next label at the burn line, with butt-cut label stock the
label perforation may be under the edge of the print
head.
The exact index position may vary slightly from printer
to printer due to calibration differences. The
command can adjust the index position.
See also
Example
! 0 0 0 0
C This format will turn indexing on and feed a
label
INDEX
END
Revision F, January 2012, CognitiveTPG
73