CognitiveTPG DLXi - Manual (Page 129)

Chapter
Revision F, January 2012, CognitiveTPG 120
4
Storing Data in the Printer
Memory
Commands discussed in this section allow you to store label formats
and graphics in the printer's memory for later use. Internal data
storage can help improve label throughput and may also simplify
programming in some applications.
NOTE: Internal data storage capability is an optional feature. Not all printers
accept these commands, and due to hardware limitations, some printers that
accept the commands may not successfully store data. Refer to
Table 1,
Printer Command Compatibility for more information.
Before Using Data Storage Commands
Before using internal data storage, please note that:
• Changing the Text or Overflow Buffer sizes will delete
objects stored in the image buffer. This will not affect normal
stored formats or graphics, but will affect enhanced stored
formats.
• Storing objects will leave unknown images in memory.
Normal label printing will clear these images, but if you use
background mode or the !+ header line mode you must clear
the spurious images from memory first. (See Header line .)
• Storage commands let you specify what memory area will
receive the stored object. The memory area is specified as
parameter xx, with the following memory areas available:
Memory Area
0 Volatile RAM
1 Reserved for future firmware releases
2 Expanded Memory
3 Nonvolatile RAM