CognitiveTPG DLXi - Manual (Page 173)

P R I N T E R S E T U P
Close Output Message Trace
Function This command is used to stop capturing output
messages to a file on a USB stick.
Explicit Form !SET MESSAGETRACECLOSE
Comments This command does not require a header line, but
must be followed by a line feed (or carriage return
and line feed). Do not use any other commands with
!SET MESSAGETRACECLOSE
.
Example The following will stop capturing output messages
to a file on a USB stick.
!SET MESSAGETRACECLOSE
164 Revision F, January 2012, CognitiveTPG