CognitiveTPG DLXi - Manual (Page 222)

P R I N T E R S E T U P
VARIABLE IRDA PROTOCOL
Function Selects one of the two available IrDa
communications protocols: Lite or Denso.
Explicit Form
Implicit Form
VARIABLE IRDA PROTOCOL protocol
V IRDA PROTOCOL protocol
Parameters
protocol Valid options: Lite or
Denso.
Comments This command is not supported in DLX or CSeries
printers.
When using this command, send it to the
printer with VARIABLE WRITE in a non-
printing label format. Do not use this
command in stored label formats.
Example The following label format will set the IrDa protocol
to lite.
! 0 0 0 0
VARIABLE IRDA PROTOCOL LITE
VARIABLE WRITE
END
Revision F, January 2012, CognitiveTPG 213