CognitiveTPG DLXi - Manual (Page 177)

P R I N T E R S E T U P
168 Revision F, January 2012, CognitiveTPG
Write Trace Data to File
Function This command is used to write all the data that has
been captured to the USB stick.
Explicit Form !SET TRACEFLUSH
Comments This command does not require a header line, but
must be followed by a line feed (or carriage return
and line feed). Do not use any other commands with
!SET TRACEFLUSH
Example The following will write the trace data that has
been captured to the USB stick.
!SET TRACEFLUSH