Variable gap_size – CognitiveTPG DLXi User Manual

Page 214

P R I N T E R S E T U P

VARIABLE GAP_SIZE

Function

Manually sets the length of the gap size for gap

media. This command should also be used when
there is unprintable area on the label.

Explicit Form

VARIABLE GAP_SIZE nnn

Parameters

nnn

The length of the gap, in hundredths

of an inch.
? – Returns the current setting

status.

Comments

When using this command, the VARIABLE
LABEL_LENGTH should be used to set the

unprintable are of the label. The VARIABLE
MEASURE_LABEL command should also be used

to disable automatic measurement, which will
overwrite the value manually set.

When using this command, send it to the printer

with VARIABLE WRITE in a non-printing label
format. Do not use this command in stored label

formats.