Variable tof – CognitiveTPG DLXi User Manual

Page 260

P R I N T E R S E T U P

VARIABLE TOF

Function

Moves the first printed dot row to the absolute offset

specified with respect to the index position. This
value replaces any previous TOF setting value for

the current indexing mode.

Explicit Form

Implicit Form

VARIABLE TOF offset

V TOF offset

Parameters

offset

Distance from the index position to the

TOF position, in thousandths of an

inch.
? returns the current setting.

NOTE: The first dot row must always be at least 3/16"
from the top edge of the label when using black bar
indexing. Trying to print too near to the top edge using
the VARIABLE TOF command will cause label
skipping.

Comments

Use this command with VARIABLE WRITE in a non-
printing label format. After sending the file to the

printer, press the FEED button once to set the new
indexed position.

Do not use this command in stored label formats.

The position set with this command only applies to

the current indexing method (black bar , gap, or

notch).