CognitiveTPG DLXi - Manual (Page 172)

P R I N T E R S E T U P
Open Output Message Trace
Function This command is used to open a file and a USB
stick for saving output messages.
Explicit Form !SET MESSAGETRACEOPEN file
Parameters file The name of the file to create to save
output messages to.
Comments This command does not require a header line, but
must be followed by a line feed (or carriage return
and line feed). Do not use any other commands with
!SET MESSAGETRACEOPEN
.
Example The following will open the file msg1.txt on a USB
stick to capture output messages.
!SET MESSAGETRACEOPEN msg1.txt
Revision F, January 2012, CognitiveTPG 163