CognitiveTPG DLXi - Manual

B A R C O D E Q R
Function Prints a 2-D matrix symbology consisting of an array of nominally
square modules arranged in an overall square pattern using the
QR symbology. A uniqu
e pattern at three of the symbol’s four
corners assists in determining the bar code size, position, and
rotation.
Explicit Form BARCODE QR x y cellsize [m=model] size data
x y X and Y starting position for bar code block.
cellsize Sets the number of pixels which make a module
(square) in the barcode.
model Specifies the original version (m = 1), or the
enhanced form of the symbology (m = 2). model 2 is
the recommended model.
size Number of encoded data bytes, including carriage
returns and line feeds, or A[delim] where delim
indicates a delimiter used to mark the data start
and end (see Example).
data Data to be encoded.
NOTE: The number of bytes specified must exactly
equal the number of bytes in the data that follows. The
printer may not execute other commands following the
BARCODE QR command if the byte value is incorrect.