CognitiveTPG DLXi User Manual
Page 101
S T A N D A R D P R I N T E R C O M M A N D S
The printer sends a five digit number after each
letter. If the leading letter is a C (indicating the
battery is charging), the number following the C is
proportional to the battery charge state. If the leading
letter is an E (indicating an EEPROM error), the
number following the E is the EEPROM checksum. In
all other cases, the five digit number shows the
quantity of unprinted labels in the current batch.
E
messages have two parts. The first part begins with
an E and is followed by the calculated checksum. The
second part begins with an E and is followed by the
stored checksum.
NOTE: If the printer detects an EEPROM error, it will
automatically load the nonvolatile RAM with default
values. The printer may work, but print quality may be
degraded. Contact your service technician when an
EEPROM error occurs.
See also
Example
!QS
!IMPORTANT
Use this command exactly as shown in the example. Do
not use other commands with the
QUERY STATUS
command.
92
Revision F, January 2012, CognitiveTPG