CognitiveTPG DLXi - Manual (Page 227)

P R I N T E R S E T U P
VARIABLE MEASURE_LABEL
Function Enables or disables automatic label length
measurement when performing an index
calibration.
Explicit Form
Implicit Form
VARIABLE MEASURE_LABEL status
V MEASURE LABEL status
Parameters status ON – Labels will be measured during
index calibration.
OFF – Labels will not be measured
during index calibration.
? – Returns the current setting status.
Comments This command is used to enable or disable
automatic label measuring when an index
calibration is performed.
When using this command, send it to the printer
with VARIABLE WRITE in a non-printing label
format. Do not use this command in stored label
formats.
See also VARIABLE LABEL_LENGTH , VARIABLE
GAP_SIZE
Example The format below will enable label measurement
during index calibration:
! 0 0 0 0
VARIABLE MEASURE_LABEL ON
VARIABLE WRITE
END
218 Revision F, January 2012, CognitiveTPG