Graphic store – CognitiveTPG DLXi User Manual

Page 149

S T O R I N G D A T A I N T H E P R I N T E R M E M O R Y

GRAPHIC STORE

Function

Stores the graphics file following the command in

the specified memory area

NOTE: Use this command with a dummy header line,
and do not use an

END

command or any other

commands with it. The graphics data to be stored
must immediately follow the

GRAPHIC STORE

command.

Explicit Form

GRAPHIC STORE

Type xx Identifier

Parameters

Type

Graphic file type. Allowable types

are PCX, BMP, and LOGO
(proprietary CSI graphics format).

Numeric identifier for the desired
memory storage area.

identifier

Alphanumeric identifier to use
when storing this data. Must be

eight or fewer printable characters

with no spaces.

Comments

The printer waits for graphics data after it

receives the GRAPHIC STORE command. Incoming
data following the GRAPHIC STORE command is

stored in the specified memory area. The printer
automatically reverts to normal data input

processing when it sees the end of the graphics file.

Use the

command to recall and

print the graphic on labels. The printer only prints

black-and-white graphics. Also, graphics are
printed full-scale, with each image dot

corresponding to one printed dot.