CognitiveTPG DLXi - Manual (Page 44)

S T A N D A R D P R I N T E R C O M M A N D S
BARCODE_FONT
Function Allows selection of the font type, size, and position of
the human-readable characters printed below the
bar-coded information.
Explicit Form BARCODE_FONT type
Implicit Form BT type
Font type. Most printers can use any
resident font except Ultra Font C.
STRING
is the default font type and will
work with any printer. If you use a
STRING
font you only need to specify the
font size and modifiers. For all other fonts
you must spell out the font command
name, font size, and modifiers; for
example, ULTRA_FONT A20 (5,3,0) or
TEXT 3
.
NOTE: Not all printers will accept all font
types for bar code subtext. Refer to
Table
4. Printer Font Support for more
information.
type
You may use any font modifiers except
for font rotation modifiers (bar code
subtext automatically rotates with the
bar code). When using STRING fonts,
two more optional modifiers are
available:
Parameters
horadj
Offsets the printed text horizontally.
Must be two digits; add leading zeros as
required. May be positive or negative. If
negative, the subtext is moved to the left.
Revision F, January 2012, CognitiveTPG 35