CognitiveTPG DLXi - Manual (Page 12)

I N T R O D U C T I O N
Label Format Organization
With a few exceptions that are noted in the command descriptions,
every label format contains:
• A header line, which defines the overall label characteristics.
• One or more printer commands.
• An END statement, which tells the printer that it has
received all required data.
Here is a typical label format:
! 0 100 190 3
PITCH 100
BARCODE UPCA+ 20 75 70 19112610203
END
This label format would print a UPCA bar code on a label.
Command Syntax
CognitiveTPG printers will accept most commands in either an explicit
(long) or implicit (abbreviated) form. Both command forms, where
supported, are shown in the command descriptions. The command
descriptions use the following format:
Command
Function The purpose of the command is described here.
Explicit Form Command parameters.
Implicit Form Command parameters.
Parameters Any optional or required command parameters are
described here.
Comments Any additional comments relating to use of the
command are noted here.
Revision F, January 2012, CognitiveTPG 3