CognitiveTPG DLXi - Manual (Page 48)

S T A N D A R D P R I N T E R C O M M A N D S
height
For GS1 Databar Expanded type, this
parameter is used to specify the segment
width, in segments per line. Acceptable
values are 2 to 22, default is 22.
For UCC/EAN & CC-A/B/C types, this
parameter specifies the height of the
linear portion of the bar code. Acceptable
values are 1 to 500, default is 25.
For all other types, this parameter is
ignored. Use 0 as a placeholder.
x y X and Y starting position for bar code
block.
h This parameter is ignored. Use 0 as a
placeholder.
delim A[delim]
where delim indicates a
delimiter used to mark the data start and
end (see Example).
data Data to be encoded. The data to encode
resides between the delimiters specified in
the DELIM parameter. To separate the
linear from the composite component, a
pipe symbol ‘|’ is used. Please see the
examples.
Comments If additional information about the GS1 Databar bar
code is required, go to www.gs1.org.
Revision F, January 2012, CognitiveTPG 39