CognitiveTPG DLXi - Manual (Page 108)

S T A N D A R D P R I N T E R C O M M A N D S
each time. When using this modifier
you must specify values for
exspace
, xmult, and ymult. The
allowable range is 1 to 9. For normal
boldness, use a value of 1.
exspace Modifies the spacing between
characters. Specify values for xmult
and ymult when using exspace.
The allowable range is 1 to 9. For
normal spacing, use a value of 1.
xmult Independently expands the width of
any font. The allowable range is 0 to
9 (0 multiplies by 10), except for the
18X23 and 24X31 fonts, which have
ranges of 1 to 8. When using this
modifier you must also specify a
value for ymult. For normal font
width, use a value of 1.
ymult Independently expands the height of
any font. Range 0 to 9 (0 multiplies
by 10) except for the 18X23 and
24X31 fonts, which have ranges of 1
to 8. When using this option you
must specify a value for xmult. For
normal font height, use a value of 1.
Comments Text printed with the STRING command is always
horizontal on the label. To print rotated text, use
the R90, R180, R270, TEXT, or ULTRA_FONT
commands.
Some string font characters use slightly more space
on the printer's memory grid than the font
dimensions indicate. The space occupied by each
character is called a cell. The table below shows the
cell size for each font type.
Revision F, January 2012, CognitiveTPG 99