CognitiveTPG DLXi - Manual (Page 54)

S T A N D A R D P R I N T E R C O M M A N D S
BARCODE QR
Function Prints a 2-D matrix symbology consisting of an array
of nominally square modules arranged in an overall
square pattern using the QR symbology. A unique
pattern at three of the symbol’s four corners assists
in determining the bar code size, position, and
rotation.
Explicit Form BARCODE QR x y cellsize [m=model] size
data
x y X and Y starting position for bar code
block.
cellsize Sets the number of pixels which
make a module (square) in the
barcode.
model Specifies the original version (m = 1),
or the enhanced form of the
symbology (m = 2). model 2 is the
recommended model.
size Number of encoded data bytes,
including carriage returns and line
feeds, or A[delim] where delim
indicates a delimiter used to mark
the data start and end (see Example).
data Data to be encoded.
NOTE: The number of bytes specified
must exactly equal the number of
bytes in the data that follows. The
printer may not execute other
commands following the
BARCODE
QR command if the byte value is
incorrect.
Revision F, January 2012, CognitiveTPG 45