CognitiveTPG DLXi - Manual (Page 282)

E T H E R N E T P R I N T E R I N F O R M A T I O N
Set Host Name
Function This command is used to set the printer’s host
name string, which can be used to indentify the
printer.
Explicit Form !SET HOST_NAME name
Parameters name Name host name to use to identify
printer.
Comments
The name specified must conform to Ethernet host
name specifications (see RFC952 assumptions
section).
This command does not require a header line, but
must be followed by a line feed (or carriage return
and line feed). Do not use any other commands
with !SET HOST_NAME.
Example The following command will set the host name of
the printer to ‘MyPrinter.’
!SET HOST_NAME MyPrinter
Revision F, January 2012, CognitiveTPG 273