Variable ethernet bootp variable ethernet dhcp, Variable ethernet bootp, Variable ethernet dhcp – CognitiveTPG DLXi User Manual
Page 286
E T H E R N E T P R I N T E R I N F O R M A T I O N
VARIABLE ETHERNET BOOTP
Function
Starts up the printer by reading configuration
information from the server.
Explicit Form
VARIABLE ETHERNET BOOTP status
Implicit Form
V ETHERNET BOOTP status
Parameters
status
= Bootp enabled or disabled; ON or OFF.
The default is ON.
Comments
This command is not supported in DLX or CSeries
printers.
Example
VARIABLE ETHERNET BOOTP ON
Note: The Advantage LX, Del Sol, C Series and DLX models use this
command to control the DHCP protocol. All other printer models that have
this command when BOOTP is enabled (ON) will use the BOOTP protocol to
configure the printer’s Ethernet settings after a power-cycle.
VARIABLE ETHERNET DHCP
Function
Turns DHCP on or off.
Explicit Form
VARIABLE ETHERNET DHCP On/Off
Implicit Form
V ETHERNET DHCP On/Off
Parameters
status
=DHCP enabled or disabled; ON or OFF.
The default is ON.
? returns the current status.
Example
VARIABLE ETHERNET DHCP ON
Revision F, January 2012, CognitiveTPG
277