CognitiveTPG DLXi User Manual
Page 244
P R I N T E R S E T U P
Comments
When printing, the printer will first retract the
media as specified by Retract_Distance. When
the label is printed, the printer advances the media
as specified by Advance_Distance. When printing
a batch of labels, only the first label is retracted and
the last label advanced. When using the
command, each label is presented using the
Advance
and Retract values.
Exceeding the recommended limitations may
damage the printer.
• The RETRACT distance must be equal to
or less than the ADVANCE distance or the
media may come off the drive roller and
out of paper detection may not report
correctly.
• Thermal transfer printers are incapable
of retracting the ribbon. Exceeding the
recommended limitations may result in
poor print quality.
• The retract distance for Solus and Del Sol
thermal transfer printers is mechanically
limited. Exceeding the recommended
limitations may result in poor print
quality.
• All direct thermal printers have
recommended limited travel distances, as
explained in the following table.
Exceeding the recommended limitations
may result in poor print quality and
jamming of the print mechanism.
Revision F, January 2012, CognitiveTPG
235