CognitiveTPG DLXi - Manual (Page 111)

S T A N D A R D P R I N T E R C O M M A N D S
TERMINAL
Function Configures port to be used to prompt for input when
using stored formats, stored menus or stored
variables.
Explicit Form
Implicit Form
TERMINAL port
TERMINAL port
Parameters port RS232, LCD_PANEL, USB, RTEL,
DISCOVER, DEFAULT.
Comments This command is meant to be used during script
execution. When the DISCOVER parameter is used
the printer assumes the display device is attached
to the port that initiated the script. In the case that
the input channel is a USB Human Input Device
(HID), the output goes to the RS232 port. When the
DEFAULT parameter is used the port is reset to the
designated port set by the VARIABLE TERMINAL
command.
Example The format below shows how the TERMINAL
command could be used in a stored menu to set the
output port to the LCD display.
!A
TERMINAL LCD_PANEL
MENU START 3 MAIN
MENU ITEM "\n\n\n\rPRINT"
MENU ACTION "!R M PRINT1\n"
MENU END
END
102 Revision F, January 2012, CognitiveTPG