CognitiveTPG DLXi - Manual (Page 100)

S T A N D A R D P R I N T E R C O M M A N D S
L
Low battery. The printer sends this message
eight times per second if it detects a low
power condition and USER_FEEDBACK is ON.
The printer will send this message once
regardless of the USER_FEEDBACK state if
the power drops below the normal operating
voltage level (for example, when the power
is switched off).
O Out of paper. The printer sends this
message eight times per second if it runs out
of paper and USER_FEEDBACK is ON.
o (lowercase letter O) Out of ribbon or ribbon
stalled. (Only reported by TT printers
capable of detecting a stalled ribbon.) The
printer sends this message eight times per
second if it runs out of ribbon and
USER_FEEDBACK
is ON.
P Printing in process, or printer paused during
batch mode processing.
S
Serial port communications error.
U Printhead Up. The printhead is not fully
closed.
W Waiting. The printer is paused during a
batch printing operation.
Revision F, January 2012, CognitiveTPG 91