CognitiveTPG DLXi - Manual (Page 197)

P R I N T E R S E T U P
VARIABLE COMPATIBLE
DBF_ROT_LOC_ADJUST
Function This command will enables an adjustment when
printing double byte fonts rotated 90 or 180 degrees.
Explicit Form VARIABLE COMPATIBLE DBF_ROT_LOC_ADJUST
status
Implicit Form
V COMPATIBLE DBF_ROT_LOC_ADJUST status
Parameters
status
ON causes an adjustment to be
applied to when plotting double byte
fonts rotated 90 or 180 degrees.
OFF causes no adjustments to be
made when plotting double byte
fonts.
? returns the current setting
Comments When using this command, send it to the printer
with VARIABLE WRITE in a non-printing label
format. Do not use this command in stored label
formats.
Example The format below will enable the rotated double
byte font position adjustment.
! 0 0 0 0
VARIABLE COMPATIBLE DBF_ROT_LOC_ADJUST ON
VARIABLE WRITE
END
188 Revision F, January 2012, CognitiveTPG