GF Signet 4632 Chlorine Dioxide Analyzer System - Manual (Page 15)

15 463X Chlorine System Manual
The 8630-3 (159 001 662) has two menus the user can edit: CALIBRATE and OPTIONS.
• The CALIBRATE menu allows you to calibrate and initialize sensors, de¿ ne current loops and set relay functions.
• The OPTIONS menu allows you to set sensor type, adjust and test current loops, test relays and more.
Step 1 . Press and hold the ENTER key:
• 2 seconds to select the CALIBRATE menu.
• 5 seconds to select the OPTIONS menu.
Step 2 . Enter the Key Code.
The Key Code is Ÿ-Ÿ-Ÿ-ź keys in sequence.
• After entering the Key Code, the display will show the ¿ rst item in the selected menu.
Step 3 . Scroll the menu in a loop with the ź or Ÿ arrow keys.
Step 4 . Press the Ź key to select the menu item to be edited.
• The ¿ rst display element will begin À ashing.
Step 5 . Press the Ÿ or ź keys to edit the À ashing element.
• The Ź key advances the À ashing element.
Step 6 . Press the ENTER key to save the new setting and return to Step 3.
Press the Ÿ and ź keys simultaneously
while any element is À ashing. This will recall
the last saved value of the item being edited
and will return you to Step 3.
Made an Error?
Press the Ÿ and ź keys simultaneously
after saving the last setting to return to
View menu.
Finished Editing?
8630 Editing Procedure
8630 Editing Procedure