Burkert Type 8798 - Manual (Page 7)

7
General Information
4. general infOrmaTiOn
4.1. contact addresses
germany
Bürkert Fluid Control Systems
Sales Center
Christian-Bürkert-Str. 13-17
D-74653 Ingelfingen
Tel. + 49 (0) 7940 - 10 91 111
Fax + 49 (0) 7940 - 10 91 448
E-mail: [email protected]
international
Contact addresses can be found on the final pages of the printed
operating instructions.
And also on the Internet at:
www.burkert.com
4.2. Warranty
The warranty is only valid if the Remote Sensor Type 8798 is used
as intended in accordance with the specified application conditions.
4.3. information on the internet
The operating instructions and data sheets for Type 8798 can be found
on the Internet at:
www.burkert.com
5. sysTem descripTiOn
5.1. general description
The Remote Sensor Type 8798 is a digital non-contact position
sensor for use on pneumatically actuated variable speed drives. This
Remote Sensor is used in combination with the position controllers
(remote design) Type 8791 and Type 8792/8793. The Remote
Sensor cannot be used as a stand-alone device. Its main task is to
measure the position of a pneumatically actuated control valve.
5.1.1. features
designs
The Remote Sensor is available as a linear and rotating position
sensor to be able to record the position of stroke and swivel
actuators.
position sensor
Robust, non-contact and wear-free position sensor that is con-
nected to the position controller via a circular line for supply and
serial data transmission.
display
Display of operating modes via 2 LEDs.
English
Type 8798