Burkert Type 8798 - Manual (Page 19)

19
Installation
Key contour
Hexagon
Series 27xx Series 2300 and 2301
Nipple
Actuator
module
Fig. 16: Rotating the actuator module
→
Series 2300 and 2301 with key contour:
Fit special key
2) exactly in the key contour on the underside of
the actuator.
→
Series 2300, 2301 and 27xx with hexagon:
Place suitable open-end wrench on the hexagon of the actuator.
2)
The special key (665702) is available from your Bürkert sales
office.
Warning!
risk of injury from discharge of medium and pressure!
If the direction of rotation is wrong, the housing interface may
become detached.
• Rotate the actuator module in the specified direction only
(series 2300 and 2301 or 27xx, see “Fig. 17”) !
→
Series 2300 and 2301 with key contour:
Rotate clockwise (as seen from below) to bring the actuator
module into the required position.
→
Series 2300, 2301 and 27xx with hexagon:
Rotate counter-clockwise (as seen from below) to bring the
actuator module into the required position.
Special key
Open-end wrench
Series 2300 and 2301
with key contour Series 2300, 2301
and 27xx with hexagon
Fig. 17: Rotating with special key / open-end wrench
English
Type 8798