Franklin Fueling Systems TS-LLD Installation Manual - Manual (Page 82)

A Page A - 2 TS-LLD INSTALLATION GUIDE
Appendix A
TS-LLD Technical Specifications
Abbreviations: LSU = Leak Sensing Unit, CU = Control Unit, STP = Submerged Turbine Pump
Environmental Specifications
Operating Temperature
32° to 121° F (0° to 40° C) CU
0° to 121° F (-17° to 40° C) LSU
Storage Temperature
- 40° to 150° F (- 40° to 65° C)
Operating Humidity (CU)
0 to 95% non-condensing
Splash Resistance (CU)
Not to be exposed to direct spray, splash,
or drips.
Cleaning — See Chapter 5
Mounting Location (CU)
Dry indoor location (near the pump relay /
motor control box)
WARNING The TS-LLD control
unit must be mounted indoors
where explosive or flammable
vapors are not present, otherwise,
an explosion hazard will be created
which can result in property
damage, injury, or death.
Mechanical Specifications
Display — Type:
Alphanumeric LED (Light Emitting Diode)
— Size:
1 Line, 2 Digit, 7 Segment (0.54 inches high)
Dimensions (overall in inches)
3.35 x 4.35 x 2.25 (H x W x D [ Depth ] ) CU
23.5 x 2.4 (H x D [ Diameter ] ) LSU
Safety Approvals and Listings
Model TS-LLD USA
Model TS-LLD/C Canada
See Serial Number labels for
the Model and Serial numbers
Listed
Leak Detection
Equipment
Precision Level 2 and Level 3
ULC/ORD–C107.12
6L79
LISTED
Electronic Line Leak
Detector
6L79
LISTED
Electronic Line Leak
Detector
NOTE
☞
— ❖ —