Extron Electronics MGP 462xi Series - Manual (Page 70)

SIS
™ Pr
ogramming and Contr
ol, cont’d
MGP Series • Softwar
e Configuration and Contr
ol
4-18
PRELIMINARY
Command/response table for SIS commands (continued)
Command
ASCII (Telnet)
(host to processor)
Response
(processor to host)
Additional description
Horizontal start
Specific value X50) * X51@ ) Hst X50) * X51@ ] Set the horizontal position of the first active pixel in
the active window (input
X50) ) to X51@ .
X50) = 1 through 19.
X51@ = 0 through 255; default = 128.
Increment horizontal start value X50) + ) Hst X50) * X51@ ] Increase the horizontal start location value for input
X50) .
Decrement horizontal start value X50) – ) Hst X50) * X51@ ] Decrease the horizontal start location value for
input
X50) .
View horizontal start setting X50) ) X51@ ] View the horizontal start location of the first active
pixel in the active window.
Pixel phase (available only for RGB and YUV-HD input signals)
Specific value X50@ * X51^ U X50@ Phs X50) * X51^ ] Set the pixel phase value for the input in window
X50@ to X51^ .
X50@ = 0 through 4; 0 = all windows.
X51^ = 0 through 31.
Increment pixel phase value X50@ + U X50@ Phs X50) * X51^ ] Select the next higher pixel phase value.
Decrement pixel phase value X50@ – U X50@ Phs X50) * X51^ ] Select the next lower pixel phase value.
View pixel phase setting X50@ U X51^ ] View the current pixel phase setting for the input in
window
X50@ .
Total pixels
Specific value 11 * X50) * X51& # Tpx X50) * X51& ] Set the total pixels value for input X50) to X51& .
X51& = Auto-sensed value ± 512 lines or pixels.
Increment total pixels value 11 * X50) + # Tpx X50) * X51& ] Select the next higher total pixels value for input
X50) .
Decrement total pixels value 11 * X50) – # Tpx X50) * X51& ] Select the next lower total pixels value for input
X50) .
View total pixels setting 11 * X50) # X51& ] View the current total pixels setting for input X50) .
Active pixels
Specific value 12 * X50) * X51& # Apx X50) * X51& ] Set the active pixels value for input X50) to X51& .
Increment active pixels value 12 * X50) + # Apx X50) * X51& ] Select the next higher active pixels value for input
X50) .
Decrement active pixels value 12 * X50) – # Apx X50) * X51& ] Select the next lower active pixels value for input
X50) .
View active pixels setting 12 * X50) # X51& ] View current active pixels value for input X50) .