Extron Electronics MGP 462xi Series - Manual (Page 47)

3-25 MGP Series • Operation
PRELIMINAR
Y
3 . Rotate either Adjust knob to select one of the 128 available window preset
locations in which to save the settings.
4 . Press the Enter button to save the current window setting in the preset
location that you selected. The LCD screen shows a message indicating that
the preset is being saved to the selected memory location, followed by a
message that the preset has been saved.
The following examples show a preset saved to memory location 1.
If you want to exit this menu without saving any changes, repeatedly press
the Preset Recall/Save button until the following message appears on the
LCD screen, then press the Enter button to exit the Window Presets dialog.
Recalling a window preset
To recall a window preset using the front panel buttons,
1
. Press and release the Preset Recall/Save button. The following message
appears on the LCD screen:
WINDOW PRESET
Save To #001
WINDOW PRESET
Saving To #001
Recall #001 woINP
WINDOW PRESET
#001 RECALLED
WINDOW PRESET
#001 SAVED
WINDOW PRESET
Recall #001 wINP
WINDOW PRESET
- - - - - INPUT 1 - - - - -
[ENTER] TO EXIT
WINDOW PRESET
2 . If you want to recall the preset without the input whose number was
displayed when the preset was saved (“Recall #xxx woINP”), proceed to
step 3.
If you want to recall the input with the preset (“Recall #xxx wINP”), press the
Preset Recall/Save button again. The following message appears:
WINDOW PRESET
Save To #001
WINDOW PRESET
Saving To #001
Recall #001 woINP
WINDOW PRESET
#001 RECALLED
WINDOW PRESET
#001 SAVED
WINDOW PRESET
Recall #001 wINP
WINDOW PRESET
- - - - - INPUT 1 - - - - -
[ENTER] TO EXIT
WINDOW PRESET
If you select this option, the inputs change to display the sources that were
displayed at the time the preset was saved.
3 . Use either Adjust knob to select a window preset number to recall.
4 . Press the Enter button to recall the preset you selected. The LCD screen
shows a message indicating that the preset was recalled. The following
example shows a message indicating that preset 1 was recalled.
WINDOW PRESET
Save To #001
WINDOW PRESET
Saving To #001
Recall #001 woINP
WINDOW PRESET
#001 RECALLED
WINDOW PRESET
#001 SAVED
WINDOW PRESET
Recall #001 wINP
WINDOW PRESET
- - - - - INPUT 1 - - - - -
[ENTER] TO EXIT
WINDOW PRESET
WINDOW PRESET
Save To #001
WINDOW PRESET
Saving To #001
Recall #001 woINP
WINDOW PRESET
#001 RECALLED
WINDOW PRESET
#001 SAVED
WINDOW PRESET
Recall #001 wINP
WINDOW PRESET
- - - - - INPUT 1 - - - - -
[ENTER] TO EXIT
WINDOW PRESET
WINDOW PRESET
Save To #001
WINDOW PRESET
Saving To #001
Recall #001 woINP
WINDOW PRESET
#001 RECALLED
WINDOW PRESET
#001 SAVED
WINDOW PRESET
Recall #001 wINP
WINDOW PRESET
- - - - - INPUT 1 - - - - -
[ENTER] TO EXIT
WINDOW PRESET