Preliminar y – Extron Electronics MGP 462xi Series User Manual
Page 133

A-3
MGP Series • Specifications, Part Numbers, and Accessories
PRELIMINAR
Y
Sync
Input type ....................................... RGBHV, RGBS, RGsB, RsGsBs, RGBcvS, YUV (tri-level or bi-level on Y
channel)
Output type .................................... RGBHV, RGBS, RGsB, YUV (tri-level or bi-level on Y channel)
Input standards ............................. NTSC 3.58, NTSC 4.43, PAL, SECAM, SMTPE 292M
Input level ...................................... 2.75 V to 5.0 Vp-p for RGBHV or RGBS
0.6 Vp-p for component video tri-level sync
0.3 Vp-p for component video bi-level sync or RGsB
Output level ................................... 0.6 Vp-p for component video (tri-level sync)
TTL: 5.0 Vp-p, unterminated for RGBHV, RGBS
Input impedance ........................... 510 ohms
Output impedance ........................ 75 ohms
Polarity............................................ Positive or negative (selectable)
Control/remote — processor/decoder/scaler
Serial control ports ........................ (1) RS-232 or RS-422, 9-pin female D connector
(1) RS-232, 2.5 mm mini stereo jack
Baud rate and protocol ................. 2400 to 115200 baud (default: 9600), 8 data bits, 1 stop bit, no parity
Serial control pin configurations
9-pin D connector .............. RS-232: 2 = Tx, 3 = Rx, 5 = GND
RS-422: 2 = Tx-, 3 = Rx-, 5 = GND, 7 = Rx+, 8 = Tx+
2.5 mm mini stereo jack .... Tip = Tx, ring = Rx, sleeve = GND
Ethernet control port..................... 1 RJ-45 female connector
Ethernet data rate .......................... 10/100Base-T, half/full duplex with autodetect
Ethernet protocol ........................... ARP, DHCP, ICMP (ping), TCP/IP, Telnet, HTTP, SMTP
Program control ............................. Extron's Simple Instruction Set (SIS
™
)
Microsoft
®
Internet Explorer, Telnet
Extron’s control/configuration program for Windows
®
General
Power .............................................. 100 VAC to 240 VAC, 50-60 Hz, 30 watts, internal
Temperature/humidity ................ Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling ........................................... Fan, right to left (as viewed from the front panel)
Mounting ........................................ Rack mountable with included brackets
Enclosure type ............................... Metal
Enclosure dimensions (per unit) . 3.4" H x 17.5" W x 12.0" D (2U high, 1 rack wide)
(8.6 cm H x 44.5 cm W x 30.5 cm D)
(Depth excludes connectors and knobs. Width excludes rack ears.)
Product weight .............................. 8.5 lbs (3.9 kg)
Shipping weight ............................ 18 lbs (9 kg)
Vibration ......................................... ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety ................................... CE, c-UL, UL
EMI/EMC .......................... CE, C-tick, FCC Class A, ICES, VCCI
Environmental ................... Complies with the appropriate requirements of WEEE.
MTBF ............................................... 30,000 hours
Warranty ......................................... 3 years parts and labor
N
All nominal levels are at ±10%.
N
Specifications are subject to change without notice.