Extron Electronics MGP 462xi Series - Manual (Page 38)

Operation, cont’d
MGP Series • Operation 3-16
PRELIMINAR
Y
Curtain wipe — A curtain wipe causes the new window to appear to unroll over
the other one in one of two ways:
• In from the left and right edges to the center of the window
• Out from the center to the right and left edges of the window
A curtain wipe can have a soft (fuzzy) or a hard (sharp) leading edge.
Effect Duration submenu
Use this submenu to set the amount of time the MGP 464 takes to complete
a transition effect. Select from durations ranging from 0.0 to 5.0 seconds, in
0.1 second increments. (Duration is not available with the cut effect.)
To set an effect duration,
1
. Press the Menu button repeatedly until Window Configuration is displayed
on the LCD screen.
2 . Press the Next button until Effect Duration is displayed.
3 . Rotate either the horizontal Adjust ( [ ) or the vertical Adjust ({) knob to
select an effect duration.
Background Capture menu
The Background Capture menu allows you to capture the image currently on the
output screen and save it as a bitmap (.bmp) file with one of 16 designated image
names. You can then recall the image and use it as a background.
Background Capture also can be done via the Windows-based control software (see
“ Windows ® -based Control Software ” in chapter 4, “Software Configuration and
Control”).
Window
Configuration
Background
Capture
Menu
Save Bkgd to Mem
none
Recall Bkgd Mem
none
Save Bkgd to mem
Saving Busy!!!
Next Use either Adjust knob
to select a background.
Next
Recalled Recalling
[Detail] = Confirm
Next
Save current image
as a background
Select a name for the
background file being
saved: bkg01.bmp
through bkg16.bmp
Next
Recall a background
Image from memory
Select an image
file name to recall for
use as background.
Detail
If None is selected
Background Capture menu flow