Extron Electronics MGP 462xi Series - Manual (Page 49)

3-27 MGP Series • Operation
PRELIMINAR
Y
Window
1
Window
2 Window
1
Window
2
Window
1
Window
2
Window
2
Window
1
Window
1
Window
2
Window
1
Window
2
Background Area
Window
2
Window
1
Window
2
Window
1 Window
2
Window
1 Window
2
Window
1
(solid color)
Preset #1 Preset #2 Preset #3 Preset #4
Preset #5 Preset #6 Preset #7 Preset #8
Preset #9 Preset #10
Factory default presets for the MGP 462xi
Input presets
The MGP has 128 input preset slots, which can save signal type, input configuration
settings, picture control settings, and window text for any of the inputs. These
presets can be saved and recalled using the Windows-based control software (refer
to the software’s help file), SIS commands (see chapter 4, “ Software Configuration
and Control ”), or the MGP 464 or MGP 462xi Web pages (see “ Input presets ” in
chapter 5, “HTML Configuration and Control,” for further information).
The following settings are contained in the input presets:
Input Type
Horizontal Start Total Pixels
Input Name Vertical Start Active Pixels
Film Mode On/Off Pixel Phase Active Lines
Brightness Contrast Color
Tint Detail (sharpness) Percentage of window filled*
* Image size and position are saved as a percent of the window, so that the input
preset can be used for any size window.
N The 128 input presets are global, containing all of the settings for an input when
the MGP is used with a matrix switcher. This allows a matrix switcher with
multiple types of video inputs to be connected to the MGP 464 to expand the
number of input video sources.
Each input should be switched into the MGP, configured (window/image sizing,
position, color, tint, brightness, contrast, and text label), then saved as a preset
for recall by the control system when that input is sent from the switcher to any
of the four MGP inputs.