Printronix SL4M User Manual
Page 67
67
Save Config.
Load Config.
Print Config.
Delete Config.
Power-Up Config.
Protect Configs.
Name Config 1
Name Config 2
Name Config 3
Name Config 4
Name Config 5
Name Config 6
Name Config 7
Name Config 8
Reset Cfg Names
Auto Save
CONFIGURATION
RFID
DIAGNOSTICS
Printer Tests
Test Count
Software Build
Feature File
1
Hex Dump Mode
Print Error Log
Clear Error Log
FLASH Installed
EMC FLASH Installed
2
DRAM Installed
Ptr On Time
Printer Usage
PrintHead Usage
Head On Time
Reset Head Data
Head Resolution
Head Voltage
Refer to the
RFID
Labeling Reference
Manual.
Host Interface
ETHERNET PORT
5
ETHERNET SETTING
3
WLAN SETTING
4
Parallel Port
5
CENTRONICS
6
IEEE 1284
7
USB Port
Serial Port
Printer Mgmt
INTERFACES
Notes:
Italicized items are available only when Admin User is set to Enable (in the
PRINTER SETUP menu).
1
This menu only appears if Feature File is loaded.
2
This menu only appears if the EMC is installed.
3
This menu only appears only if the NIC is installed.
4
This menu only appears only if the Wireless NIC is installed.
5
This menu only appears if Host Interface is set to Auto Switching.
6
This menu only appears if Host Interface is set to Centronics.
7
This menu only appears if Host Interface is set to IEEE 1284.