Printronix SL4M - Manual (Page 116)

116
Chapter 4 PRINTER SETUP Menu
Bot Line Display
• Ribbon Life (factory default). The last line of the display shows the ribbon
life. When the printer is online and after a few labels have been fed,
"Ribbon Life" and 1 to 4 asterisks will display on the last line of the LCD
indicating the approximate amount of ribbon remaining on the supply
spindle, based on a standard 450m ribbon. An exact value cannot be
determined, since ribbon thickness and roll lengths vary:
Ribbon Life **** = Full to 3/4 full
Ribbon Life -*** = less than 3/4 to 1/2 full
Ribbon Life --** = less than 1/2 to 1/4 full
Ribbon Life ---* = less than 1/4 to 1/8 full
• Current Config . The last line of the display shows the name of the
current configuration, which is the last loaded or saved configuration.
• Asset Tag . When operating the printer in Asset Tag Mode, the last line
displayed prompts the user to “Place Tag” or “Place Next Tag”. While the
asset tag is encoding, the last line displayed will show “Encoding…”.
• IP Address . The last line of the display shows the IP Address for the
TCP/IP protocol if the NIC or Wireless NIC options are installed. If the
printer has the Wireless NIC option, the signal strength is indicated by
bars in front of the IP Address.
• No Display . The last line of the display is empty.
Admin User
• Disable (factory default).
• Enable . When enabled, this function permits access to submenu items
which would not normally be changed by a typical user.