Configure the printer menu, Install the core adapters and media take-up core, Using the full media rewinder with 3 inch diameter – Printronix SL4M User Manual
Page 247: Core adapters
Configure the Printer Menu
247
Using the Full Media Rewinder with 3 Inch Diameter Core
Adapters
Using the full media rewinder with 3 inch diameter core adapters allows you to
automatically rewind printed labels onto a 3 inch diameter media take-up core
after they have been printed.
Configure the Printer Menu
1.
Set Media Handling to Rewind in the MEDIA SETUP menu.
(See “Configuring the Printer” on page 61 for more information.)
2.
Calibrate the printer (see “Running Auto Calibrate” on page 47).
Install the Core Adapters and Media Take-Up Core
Figure 15. Installing the Inside Core Adapter
1.
Slide the inside core adapter onto the rewinder until it is flush against the
rewinder flange.
2.
Tighten the thumbscrew.
pgrw
lod1
pgr
wlod2
A
Inside Core Adapter
Thumbscrew
A
Rewinder
Rewinder
Flange