Printronix SL4M - Manual (Page 115)

PRINTER SETUP Submenus
115
Tall Characters
Increases the point height of resident Intellifont characters.
• Disable (factory default). Standard resident font character point height is
maintained.
• Enable . Increases the point height of resident Intellifont characters
approximately 10%.
Batch Counter
Displays the number of pages remaining in a print job.
• Disable (factory default). The # Pages remaining to be printed will not
display. Instead, the Active emulation and interface will display on the
second line of the control panel LCD.
• Enable . The # Pages remaining to be printed will display on the second
line of the control panel LCD. This feature is supported in PGL and ZGL
only. The PGL Execute command and parameters that support this
feature are ~EXECUTE;
formname ;[;FC][;ICNT n ][;FCNTn]. The ZGL
Execute command is ^PQ(#Pages).
NOTE: If the correct execute command is absent from the print file, “0 Pages”
will continually display on the control panel LCD.
Date
This menu allows you to set the date and time. The date is expressed in
hh:mm YYYYMMMDD.
hh = hour (24 hour format)
mm = minute
MMM = month
DD = day
YYYY = year
Feed Key Online
Selects the Feed key action when the printer is online.
• Feed (factory default). A blank label is fed when the printer is online and
the Feed key is pressed.
• Reprint Last . Reprints previous printed label if the printer is online and
the Feed key is pressed.
NOTE: Pressing the Feed key when the printer is offline results in a blank
label being fed. Labels fed while the printer is offline are considered
printed pages. This results in blank feeds if online feeds are done
following an offline feed when using the Reprint Last setting.
Disp. Intensity
Sets the Display Intensity values from 0 to 20. The factory default is 10.