Printronix SL4M - Manual (Page 153)

DIAGNOSTICS Submenus
153
4. Before saving the modified configuration, you must delete the original
configuration if the Protect Config. option is enabled.
a. Press the Up or Down keys until the following message displays:
b. Press the Left or Right keys to cycle through the options (1-8).
When the desired number displays, press the
↵ key to select it.
The following message displays:
Then, the following displays when it is deleted:
5. Save the new configuration as described in the “Saving a Configuration”
on page 148. Make sure you select the same number (e.g., Config. 1)
when saving the modified configuration. The new configuration writes
over the existing one.
6. Print a copy of this newest configuration and store it in a safe place. Refer
to “Printing a Configuration” on page 154.
Delete Config.
1*
Deleting
Configuration
Delete Config.
X *