Printronix SL4M User Manual
Page 110
110
Chapter
4
PRINTER SETUP Menu
Compatibility
This parameter allows you to make SL4M/T4M series thermal printers
compatible with other printers.
When trying to preserve compatibility with respect to barcodes, you may not
always be able to make them equal in size. This is due to the various dot-per-
inch differences between printer types. When an exact match cannot be
made, the barcode is reduced in size so that the form bounds will not be
compromised and the barcode will be readable.
•
Default
(factory default). Use for optimum performance.
•
Laser
. Forces the output to correspond with the Printronix laser line of
printers.
•
P5000
. Forces the output to correspond with the P5000 line of line matrix
printers.
•
T3000
. Forces the output to correspond with the T3000 line of thermal
printers.
•
T1006
. Forces the output to correspond with the T1006 line of thermal
printers.
Del Char frm Fls
This option deletes downloaded character(s) from flash memory.
Ld Char from Fls
This option loads downloaded character(s) from flash memory to RAM.
Save Char to Fls
This option saves downloaded character(s) to flash memory.
Del Char frm RAM
This option deletes downloaded character(s) from RAM.
Ld Char at PwrUp
This option loads downloaded character(s) from flash memory to RAM at
Power Up. The options are Disable (factory default) and Enable.
Del Set frm Fls
This option deletes downloaded overlay set(s) from flash memory.
Ld Set from Fls
This option loads downloaded overlay set(s) from flash memory.
Save Set to Fls
This option saves downloaded overlay set(s) to flash memory.