Printronix SL4M - Manual (Page 243)

Configure the Printer Menu
243
Using the Full Media Rewinder Option
The full media rewinder allows you to automatically rewind printed labels into
a roll after they have been printed.
Configure the Printer Menu
1. Set Media Handling to Rewind in the MEDIA SETUP menu.
(See “Configuring the Printer” on page 61 for more information.)
2. Calibrate the printer (see “Running Auto Calibrate” on page 47).
Load Media
Figure 12. Loading the Media Rewinder
1. To load media, refer to “Loading Roll Media” on page 25 and complete
step 1 through step 10. Be sure to open the side cover.
2. Thread the media over the front of the media guide, around the media
guide roller, and through the frame opening toward the rewinder.
See Figure 12 and Figure 13.
Media Guide
Media
Media Guide
Roller
Media
Rewinder Clip
Side Cover
Media Cover
Frame
Opening
Rewinder
Media Damper