Printronix P8000 Series Cartridge Ribbon Printer - Manual (Page 93)

OpenPrint P8000 HD Postscript/PDF Firmware
93
HOST INTERFACE Menu
The Host Interface Menu enables you to select and configure one of many
types of interfaces between the printer and your host computer. The currently
selected interface is indicated with an asterisk on the control panel message
display. Each interface has its own submenu with a set of interface
parameters which can be configured.
IMPORTANT When set to Auto Switching, the printer will load the power-up
configuration and the new interface parameters. Any settings made and
not saved before selecting these interfaces will be lost.
IEEE 1284 1 Auto
Switching
Centronics 1 Serial
(see page 96) (see page 94) (see page 98) (see page 100)
* = Factory Default
1 If installed.
2 Used by LG firmware instead of Centronics and IEEE 1284.
3
Default for Indian Language firmware.
HOST
INTERFACE
(from page 73,
74, 75, 76, 77,
78, and 79)
USB
(see page 100)
Active
Host
Auto Switching
Centronics
1
Serial
IEEE 1284 1
Ethernet 3
USB
Parallel
2
Parallel
Type 2
Centronics*
IEEE 1284
HOST INTERFACE Menu