Printronix P8000 Series Cartridge Ribbon Printer - Manual (Page 144)

144
Chapter 4 EMULATION Menu
Print Char. Set
When this selection is displayed and the ENTER key is pressed, the current
character set is printed.
Indian Option
• Indian Formatter . The available options include Disable, Script Page,
and Data Page.
• Disable (factory default). The Indian characters will print without
composing.
• Script Page . Allows printing of Indian characters with composing for
non-table format.
• Data Page . Allows Indian character printing with composing for table-
formatted data. Data Page does not support ESC sequence commands
nor other single byte commands except for CR, LF, FF, BEL, DC1, and
DC3.
• Tall ASCII Font . The available options include Enable and Disable.
• Disable (factory default)
• Enable . When enabling the Tall ASCII Font setting, the ASCII
characters will print as tall fonts. This setting is available only for 10, 12,
and 13.3 CPI for DP and NLQ settings. It is recommended to print the Tall
ASCII font with 4 LPI setting or lower to avoid overlapping.
• Space Width Adj . The values range from 1 to 30. The default value is 12.
This option allows spacing adjustment between the words in Indian
character printing. This feature works only with Indian code pages and not
with Standard code pages. The Space Width Adj value affects the
character width of the space character (0x20) and the dash character
(0x2D). The Space Width Adjust value is applicable to both script page
and data page selections. Table 11 on page 145 shows the space width
adjustment value according to its typeface and CPI setting.