Printronix P8000 Series Cartridge Ribbon Printer - Manual (Page 146)

146
Chapter 4 EMULATION Menu
Set Substitution
When this option is activated, the character set overlay in RAM is activated.
This can also be accomplished through a host command of
SFCC RX . In
either case, a flag is set indicating that the substitution table is active. If the
power-up configuration has Ld Set at Pwrup and Set Substitution both
enabled, the character set overlay is automatically activated at power-up or
during a soft reset. See the
LinePrinter Plus Programmer's Reference Manual
for more information.
Barcode x-offset
• Disable (factory default)
• Enable . Allows text to print next to a barcode when xxxx and yyyy are not
set to the origin.
Barcode Height
• Disable (factory default)
• Enable . If Barcode x-offset is enabled, the barcode height follows P5000
legacy barcode behavior.
Error Handling (H-Series)
This command determines the way illegal DBCS characters are processed:
• Normal (factory default). Will ignore illegal DBCS characters.
• As Space . Will insert two space characters (0X20, 0X20) when the data
stream contains the illegal DBCS character.
• As Square . Will insert a black square (0xAIBD) when the data stream
contains the illegal DBCS character. This is applicable for the Hanzi Big5
build only.