Printronix P8000 Series Cartridge Ribbon Printer - Manual (Page 163)

Epson FX Emulation
163
Epson FX Emulation
Define CR Code
The Define CR Code option controls the action of the printer when it receives
a Carriage Return code (hex 0D) from the host computer. If this feature is
enabled, each time the printer receives a carriage return, it inserts an
additional Line Feed code (hex 0A) into the data stream. Do not use this
feature if the host computer sends line feeds to the printer.
• CR = CR (factory default). Does not insert an extra line feed after each
carriage return.
• CR = CR + LF . Inserts an extra line feed after each carriage return.
Autowrap
This option defines the printer actions when print data is received past the
forms width setting.
• With LF+CR (factory default). Performs an automatic carriage return and
line feed when data is received past the forms width.
• With CR . Performs an automatic carriage return (without line feed) when
data is received past the forms width.
• Disable . Discards any data past the forms width.
Define LF Code
The Define LF Code option controls the action of the printer when it receives a
Line Feed code (hex 0A) from the host computer. If this feature is enabled,
each time the printer receives a Line Feed, it inserts an additional Carriage
Return code (hex 0D) into the data stream. This feature is required if the host
computer does not send carriage returns to the printer.
• LF = LF (factory default). Does not add a carriage return with a line feed.
• LF = CR + LF . Adds an extra carriage return with each line feed.
Printer
Protocol
(from page 125)
Define CR
Code
Autowrap Define LF
Code
Printer
Select
Character
Set
20 CPI
Condensed
Alt. Set
80-9F
CR = CR*
CR = CR + LF
With LF+CR*
With CR
Disable
LF = LF*
LF = CR + LF
Disable*
Enable
(see page 165) Enable*
Disable
Control Code*
Printable
* = Factory Default
Epson FX